Форсунка системы питания с общей торливной магистралью испытательном стенде/CR1000 коллектора впрыска топлива инжектора дизельного инструментов


Цена:90,00 $ - 130,00 $*
Стоимость в USD (на сегодня):Узнать


Описание и отзывы


Product Description

CR1000 common rail diesel fuel injector tools tester

CR1000 can test nozzle spray pattern and injector back leakage, to check the CR injector with either solenoid or piezo technology CR1000, the repair tester to simulate the engine Control Unit (ECU) driving signals for a common rail injector of either solenoid technology or piezo technology ,made by Boschh, Delphhi, Densso and Siemenss. The user is able to set the control parameters of fuel injection drive signals.
By combining of a CR-1000 tester and a high pressure fuel source, which may be a mechanical manual pump, or an electrical motor driven pump, or a pneumatic driven pressure booster, to feed the CR injector, the user is able to fulfill the tasks, such as nozzle spray pattern and injector back leakage, to check the CR injector with either solenoid and piezo technology.

Test atomization effect, pilot injection, discharge point and full load point.
Type of the motivation
BOCH,DENSO,DELPHI,PIEZO modes made in China and general
Max. pulse width
Max. frequency
AC110~240V 50Hz
Operating temperature
Packing size

Design Features:
1. Modulated driving signal to ensure the safety of the solenoids of the injectors
2. Injector driving signal Adjustable frequency and pulse width
3. Short circuit protection for solenoid driving signals
4. Rich accessories, ready to test Boschh, Densoo and Delphhi injectors

Related Products


The package is wooden case or plywood case, If you need, we can also pack the products according to your demands.

After Sales Service




E-mail: an17564323010@outlook.com

Website: https://xinbaodi.en.alibaba.com


Company Introduction

Our company specialized in quality so we're very confidence in our products. Also there're many kinds of equipments to choose. If you're not satisfied with these equipments, we have PTG(professional technical group) to design what you want to buy. So if you have any questions please contact with us at any time. We're very pleased to serve you and we believe in great service all the time.


Q:Can I visit you?Are you trading company or manufacturer?
A:Sure, we are manufacturer. Our factory is located in Tai'an, Shandong, China, and has more than 20 years of professional production experience.Warmly welcome to visit our factory if it's convenient for you, please contact us to make an appointment and supply the pick-up service and hotel reservation service.
Q:How many days do you need for delivery?
A: Some of our machines have stock available,once you ordered and made payment, we will deliver it asap. If it has no stock, we may need around 15-20 days for new production. Of course the delivery time is determined by the order you purchase. We will try our best to produce faster if your schedule is urgent.
Q: Can I negotiate the prices for the machine?
A:Yes, we may consider great discounts for mass buying quantity, the more you buy, the lower our price will be. Please contact with our sales and get the catalogue and quotation for your request .
Q:What is your price term and payment term?
A: Price term: EXW,FOB,CFR,CIF ect. ,Payment term: T/T or online on Alibaba.
Q:Can you give warranty of your products?
A:14 months warranty for our product, whole life technical support. we have professional business managers who can serve clients in 24 hours.
Q:How to install and operate the machine?
A:Most of the machine are fully assembled in our factory, so just open and remove the package and get power connected. For some machines, the main parts are well assembled, you might need to install some parts which are easy to install and any problem may have can contact with us for more information for installation . About operate the machine, we have operation instructions for you.
Q:Do you have some tools?
A:Yes, we have many kinds of tools and spare parts.

Похожие товары

0.1866 s.