Калиброванный топливный бак из нержавеющей стали ss304
US $68.00-$74.00
Поделиться:
Thread ring gauges are used to check the outside major diameter and pitch diameter limits on threaded parts | Thread ring gauges are used to check the outside major diameter and pitch diameter limits on threaded parts | |
Like many other thread gages, these gages use a GO and NO GO method to determine if the threads fall within the tolerance or the class of fit. Thread ring gages are quite simple to use; if the GO end screws on, and the NO GO end will not screw on past three complete turns, then the part is within tolerance | Like many other thread gages, these gages use a GO and NO GO method to determine if the threads fall within the tolerance or the class of fit. Thread ring gages are quite simple to use; if the GO end screws on, and the NO GO end will not screw on past three complete turns, then the part is within tolerance | |
Thread Ring gages are available in Straight Pipe and Taper pipe styles | Thread Ring gages are available in Straight Pipe and Taperpipe styles | |
Material : | Made of high performance bearing steel GCR15 , high hardenability, high hardness and fatigue strength, good dimensional stability, and SKD11 material are availiable | |
Tolerance: | Thread tolerance class: 4,5,6,7,8 ,Thread tolerance external thread g, h | |
Quality Assurance | Each gages is rigorously tested to ensure that the dimensional data is qualified before leaving the factory, If you still need a calibration certificate from a third-party laboratory, please let us know in advance, this need extra cost | |
What Thread Ring Checks | GO gage checks the maximum minor diameter and the maximum pitch diameter size in a part NO-GO gage checks for the hole not to exceed the minimum pitch diameter size on a part | |
Specification for Thread Ring Gauges | ||
Thread Type | Range of Size We Have | |
Metric M | M1-M11000 | |
Trapezoidal thread TR | TR9-TR580 | |
ACME | ACME 1/2-ACME 10'' | |
STUB ACME | STUB ACME 1/2-STUB ACME 10'' | |
G | G 1/16-G10'' | |
NPT | NPT 1/16-NPT 10'' | |
R,RC | R 1/16-R10'' | |
MJ | MJ3-MJ48 | |
BSP | BSP 1/8-BSP6'' | |
PG | PG7-PG48 | |
NPTF | NPTF 1/16-NPTF 1/2 | |
UNC,UNF,UNS,UNEF,UN | 1/16-10'' | |
NPSM | NPSM 1/8-NPSM6'' | |
Non standard size | according to technical data or drawing which buyer provided | |