We are KONNWEI Factory In china ONLY !
All konnwei item u see on market were manufactured by us
konnwei Car battery Monitor BM2 BM3 Blue tooth 4.0 Wireless Battery Tester 12V Automotive Battery Load Tester for Android IOS
Model : BK100
Different from the traditional testing method. KONNWEI BK100 is using the newest BT technology to detect the car battery, you no longer have to stand in front of the car waiting for your testing work, after connecting the car battery you can open the app on your phone/tablet for car battery testing work, which is customer friendly and easy to use.
With KONNWEI BK100 automotive battery tester, we can check the overall health of the battery, including the cranking test, and run a complete system charging test. The cranking test is to test and analyze the starter motor to check if the starter motor is working properly, and the charging test is to check the state of the charging system to avoid damaging the battery. It is much more convenient than driving a few miles to a nearby auto repair store.
Our Blue-t wireless car battery tester is compatible with all 6 volt and 12 volt lead-acid batteries include regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries with the test range (100-2000 CCA). Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers, and even golf carts.
KONNWEI BK100 is Plug-and-Play, and it provides Accuracy testing reports within seconds, greatly improved the testing speed compared to other battery testers. It also has a polarity reversal protection function. The clip reversal will not damage the tester, and will not have any adverse effects on the car and the battery. KONNWEI BK100 can directly test the loss of power battery, no need to be fully charged first and tested.
Support for multiple languages such as English, Spanish, German, Russian, Italian, French, Portuguese, etc. The actual language depends on the system language setting of your phone/tablet. The language display will follow your system language change.
Model : KW510
|1||12V 4Ah-100Ah Test & Repair & Recharge Battery Tester|
|2||Vehicle cranking system test, cranking time,voltage and status. vehicle charging system test load voltage,unloaded voltage,ripple status and charging system status.|
|3||12V 4Ah-100Ah car battery can be charged full power within 12 hours .|
|4||Restore the capacity of the battery by repairing the car battery, extend the service life of the battery.|
Model : KW850
|1||KW850 Works on most 1996 (OBDII & CAN) domestic and imported vehicles.|
|2||It can read and erase car fault code O2 sensor test, EVAP systems test, and on-board monitoring test etc.|
|3||It give you full control of your vehicle's running status, |
while a graphical and numeric live data stream display will help you to find out the faulty sensor readings.
Model : KW681
|1||Check actual cold cranking amps capability of the car & motorcycle starting battery, healthy state of the battery itself, and common fault of the vehicle starting system and charging system|
|2||Works on ALL OBD II Enabled vehicles,Allows you to accurately identify the cause of your |
CHECK ENGINE and perhaps fix it without going to see your dealer
|3||KW681= Car battery ester + Car OBDII dianostic scanner =2 function in one .|
[Professional Car Code Reader]KONNWEI KW850 obd2 scanner is an enhanced auto scanner that you can not only check all engine related fault codes, find out what caused the check engine light comes on, turn-off Malfunction Indicator Lamp (MIL), locate bad O2 sensor, but also can monitor car battery health status, remind you when the battery need to be replaced. It’s a perfect scan tool helps you to determine if your car need to be repaired and avoid blind maintenance, saves your time and money.
[Wide Array of Compatibility] Accurately read and erase error codes on all OBD2 protocol vehicles with a 16 PIN interface (KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). The KONNWEI KW850 automobile diagnostic is compatible with most US vehicles that are model year 1996 or later – including sedans, SUVs, light trucks, and 12V diesels. This is a plug-and-play engine diagnostic code reader (both generic and manufacturer specific codes) – no extra batteries or apps required.
[Not Only Full OBD2 Function] All 10 modes OBD2 diagnostic function including: read and erase fault codes, retrieve I/M readiness and freeze frame data. Unique graphical forms to display live sensor data, Auto VIN acquisition, O2 Sensor and EVAP Test (Mode 8), Advanced On-board Monitoring (Mode 6). This auto code reader can not only reveal what error codes your car is producing, but also monitor the battery voltage at all time during OBD car diagnostic, reminds you when having an aging battery.
[BEST Stability and Performance]This KW850 OBD2 car computer reader does all diagnosis via 2.8’’ color LCD screen, features with user-friendly UI design and STM-32 main chip, this diagnostic code scanner can access OBDII car diagnostics, DTC Lookup and Review 2-3 times faster than other car diagnostic scanners. With patented design soft silicone keypad and Red-Yellow-Green LEDs indicators, you don’t even need to read the manual and will enjoy the car diagnostics just as the professionals.
[Warranty & Update] The KW850 OBD2 code scanner supports life-time free smart update service, Built-in memory card allows you to store diagnostic data and upload to computers for printing (for Windows ONLY). The KW850package comes with a free carry case It’s a must have tool for you and your family.
[Great Gift for Father] As the father's day comming, you can choose this wonderful obd2 scanner for your father or your husband as a superise present.