Поделиться:
Audio | ||
OUTPUT POWER(8Ω) | 1300W*4 | |
OUTPUT POWER(4Ω) | 1500W*4 | |
BRIDGE POWER(8Ω) | 3000W*2 | |
Frequency | 20Hz-20KHz(+/-3dB) | |
Total Harmonic Distortion 20Hz-20kHz 8OHM | <0.05% | |
Noise | < 1mv | |
Damping Factor | >600 | |
Input Sensitivity | 1V | |
Input Impedance(Ω) | 20K OHM | |
Input Circuitry | Class D | |
Heat-Dissipating | Fan | |
Power Supply Voltage | 90v~265v PFC | |
DSP | ||
Analog Inputs and output | 4 in 4 out | |
Max. Input Level | 20 dBu | |
Input Impedance (single ended) | 10 kΩ | |
Input-to-output latency | 510 µs | |
Gain | 36 dB | |
Dynamic Range (unity gain) | 106 dB(A) | |
THD (@ 0dBu, 1kHz, unity gain) | <0.01% | |
Frequency Response | 20 Hz–20 kHz, ±0.5 dB | |
Number of processors | 1 | |
Sample rate | 96 kHz | |
Delay | 100 ms | |
PEQ (each input and output) | 7 bands | |
Grouping EQ (each input) | 31 bands | |
Crossover (each input, LPF and HPF) | Butterworth,Linkwitz,Bessel 6dB/oct~48dB/oct | |
Crossover (each output, LPF and HPF) | Butterworth,Linkwitz,Bessel 6dB/oct~48dB/oct | |
Limiter attack | 8040 db | |
Limiter release | 23 db | |
S/N | 114 dB | |
NoiseGata | ﹣100-0 dB | |
Fir | 1024(4*256) taps | |
Minimum analog supply voltage | +/- 12 V | |
Nominal analog supply voltage | +/- 15 V | |
Low Voltage supply output | 5 +/- 5% V | |
Current consumption +15V | 380 mA | |
Current consumption -15V | 50 mA | |
Max. Current consumption on Low Voltage output | 50 mA |